# Pi Multi-FX Pedal — Focusrite 4CM Test Config
# 4-Cable Method stereo mode: 2 in, 2 out
# Guitar → Input 1, Amp Send → Input 2
# Output 1 → Amp Input (Send), Output 2 → Amp Return (Output)
audio:
  mode: stereo_4cm
  hat_type: focusrite
  input_device: "hw:1,0"
  output_device: "hw:1,0"
  jack_enabled: true
  auto_connect: true
  profile: standard

midi:
  uart_port: "/dev/ttyAMA0"
  usb: true

footswitch:
  layout:
    - {gpio_pin: 17, action_default: preset_up, action_long_press: tap_tempo}
    - {gpio_pin: 27, action_default: preset_down, action_long_press: tuner}
    - {gpio_pin: 22, action_default: bypass, action_long_press: snapshot_save}
    - {gpio_pin: 23, action_default: bank_up, action_long_press: bank_down}

leds:
  driver: mock
  num_leds: 4
  pin: "D18"
  brightness: 0.5

display:
  i2c_bus: 1
  i2c_addr: 0x3C

presets:
  dir: "~/.pedal/presets"
  install_factory: true