# Pi Multi-FX Pedal 🎸

A real-time guitar multi-FX pedal running on **Raspberry Pi 4B** with **32 DSP effects**, **NAM A2 neural amp modeling**, **IR cab simulation**, **4-Cable Method** routing, and a **web UI** on `pedal.local`.

## Quick Install (Focusrite 2i2 Test)

Get the pedal running on a fresh RPi with a Focusrite 2i2 in under 10 minutes.

### 1. OS Setup

Start with **Raspberry Pi OS Lite (64-bit)** or **DietPi**.

Configure hostname, enable SSH, and connect to WiFi:

```bash
sudo hostnamectl set-hostname pedal
# Or on DietPi: use dietpi-config
```

### 2. System Packages

```bash
sudo apt update && sudo apt upgrade -y
sudo apt install -y \
  git python3 python3-pip python3-venv python3-dev \
  jackd2 libjack-jackd2-dev \
  libsndfile1-dev \
  cmake build-essential \
  avahi-daemon          # for pedal.local mDNS
```

### 3. Clone the Repo

```bash
git clone https://gitea.ourpad.casa/shawn/pi-multifx-pedal.git ~/projects/pi-multifx-pedal
cd ~/projects/pi-multifx-pedal
```

### 4. Python Environment

```bash
python3 -m venv .venv
source .venv/bin/activate
pip install --upgrade pip
pip install -r requirements.txt
```

> **Note:** `neural-amp-modeler` needs PyTorch. On RPi 4B aarch64:
> ```bash
> pip install torch --index-url https://download.pytorch.org/whl/nightly/cpu
> ```

### 5. Focusrite-Specific Config

Kill PulseAudio (it grabs USB audio):

```bash
pulseaudio --kill
```

Verify Focusrite is detected:

```bash
aplay -l
# Look for: card 1: USB Audio [Scarlett 2i2 USB], device 0
arecord -l
# Look for same
```

Copy the mono test config:

```bash
mkdir -p ~/.pedal
cp etc/config-focusrite-mono.yaml ~/.pedal/config.yaml
```

### 6. Run the Pedal

```bash
cd ~/projects/pi-multifx-pedal
source .venv/bin/activate
python3 main.py
```

### 7. Open the Web UI

From any device on the same network:
- **Browser:** http://pedal.local
- Or use the IP: http://192.168.x.x

### WiFi Hotspot (No Network? No Problem)

If there's no WiFi network to join — stage, rehearsal space, park bench — the Pi can create its own:

```bash
# Run once to set up
sudo bash scripts/setup-wifi-ap.sh

# Or with custom SSID/password:
sudo bash scripts/setup-wifi-ap.sh --ssid "Pi-Pedal" --psk "yourpassword"

# Phone connects to "Pi-Pedal" → open http://pedal.local

# To turn it off and go back to client mode:
sudo bash scripts/setup-wifi-ap.sh --disable
```

**Pro tip:** Add a USB WiFi dongle for dual-network — Pi creates hotspot on built-in WiFi, dongle handles internet access for git pulls and updates.

### 8. Wire It Up

**Mono mode (standard pedal):**
```
Guitar jack → Focusrite Input 1 (front)
Focusrite Output 1 (rear) → Amp
```

**4CM mode (four cable method):**
```
Guitar → Focusrite Input 1
Amp FX Send → Focusrite Input 2
Focusrite Output 1 → Amp Input (Send)
Focusrite Output 2 → Amp FX Return (Output)
```

Then switch config:
```bash
cp etc/config-focusrite-4cm.yaml ~/.pedal/config.yaml
```

Toggle 4CM on/off from the Settings page in the web UI.

## Port & Privileges

The web UI runs on **port 80** (standard HTTP), so URLs are clean — just `http://pedal.local` with no port number.

Binding to port 80 requires elevated privileges. Either:

1. **Run as root** (simplest):
   ```bash
   sudo python3 main.py
   ```

2. **Grant the `cap_net_bind_service` capability** (safer — no root shell):
   ```bash
   sudo setcap 'cap_net_bind_service=+ep' $(readlink -f $(which python3))
   python3 main.py   # no sudo needed
   ```

3. **Override the port** via code change (development only):
   Change `DEFAULT_PORT` in `src/web/server.py` and `port=80` in `main.py`.

For development, option 2 is recommended.

## WiFi / Bluetooth Permissions

The WiFi hotspot and Bluetooth management features call `sudo` internally for system operations (hostapd, dnsmasq, iwlist, systemctl). If your user does not have passwordless `sudo`, these features will fail silently.

Add a sudoers entry to grant passwordless access for the pedal user (`pi` or your username):

```bash
sudo visudo -f /etc/sudoers.d/pi-pedal
```

Add one of the following, replacing `pi` with your actual username:

**Minimal** (only the WiFi setup script):
```
pi ALL=(ALL) NOPASSWD: /home/pi/projects/pi-multifx-pedal/scripts/setup-wifi-ap.sh *
pi ALL=(ALL) NOPASSWD: /usr/sbin/iwlist *
pi ALL=(ALL) NOPASSWD: /usr/sbin/iwconfig *
pi ALL=(ALL) NOPASSWD: /usr/bin/wpa_cli *
pi ALL=(ALL) NOPASSWD: /usr/bin/systemctl * hostapd
pi ALL=(ALL) NOPASSWD: /usr/bin/systemctl * dnsmasq
pi ALL=(ALL) NOPASSWD: /usr/bin/systemctl * pi-bt-midi
```

**Permissive** (full passwordless sudo — convenient on a dedicated device):
```
pi ALL=(ALL) NOPASSWD: ALL
```

The web UI surfaces permission errors with an `"insufficient_permissions"` key when `sudo` calls fail due to missing sudoers configuration.

## Hardware

| Component | Spec |
|-----------|------|
| **SBC** | Raspberry Pi 4B (2GB+ RAM) |
| **Audio I/O** | I2S DAC + ADC (PCM1808 + PCM5102 custom HAT, or USB via Focusrite 2i2) |
| **Footswitches** | 3-6 momentary soft-touch (e.g. MXR-style) |
| **LEDs** | RGB WS2812B or APA102 per footswitch + status LEDs |
| **Display** | 128x64 OLED SSD1306 (I2C) or 5" DSI touch |
| **MIDI** | 5-pin DIN in/out via UART + optoisolator |
| **Power** | 5V/3A USB-C (with buck for 3.3V rail) |
| **Enclosure** | 1590BB or 3D-printed custom |

## 32 Effects

| Category | Effects |
|----------|---------|
| **Dynamics** | Noise Gate, Compressor, Expander, De-esser, Transient Shaper, Sidechain Compressor |
| **Drive** | Boost, Overdrive, Distortion, Fuzz, Bitcrusher, Wavefolder, Rectifier |
| **Amp + Cab** | NAM Amp Model (any .nam file), IR Cab Sim (any .wav) |
| **Modulation** | Chorus, Flanger, Phaser, Tremolo, Vibrato, Ring Mod, Auto-Wah, Envelope Filter, Rotary Speaker, Uni-Vibe, Auto-Pan, Stereo Widener |
| **Time** | Delay, Ping-pong Delay, Multi-tap Delay, Reverse Delay, Tape Echo, Reverb, Shimmer Reverb, Early Reflections, Looper |
| **Pitch** | Octaver, Detune, Harmonizer, Whammy, Pitch Shifter |
| **Filter** | EQ, Parametric EQ, High-Pass, Low-Pass, Band-Pass, Notch, Formant, Wah |
| **Utility** | Volume, Tuner |

## Project Structure

```
├── src/
│   ├── dsp/              Audio processing pipeline
│   │   ├── pipeline.py   FX chain orchestration (mono + 4CM split)
│   │   ├── ir_loader.py  IR convolution engine
│   │   ├── nam_host.py   NAM model loading & inference
│   ├── midi/             MIDI subsystem
│   │   ├── handler.py    MIDI event parse & dispatch
│   ├── presets/          Preset system
│   │   ├── manager.py    Save/load/bank/preset CRUD + 4CM routing
│   │   └── types.py      Preset & chain data model + FXType enum
│   ├── ui/               Hardware UI layer
│   │   ├── footswitch.py Debounced GPIO input
│   │   ├── leds.py       RGB LED controller
│   │   └── display.py    OLED display manager
│   ├── web/              Web UI (FastAPI + WebSocket)
│   │   ├── server.py     REST + WebSocket endpoints
│   │   ├── templates/    Jinja2 HTML pages
│   │   └── static/       CSS + JS
│   └── system/           System integration
│       ├── audio.py      ALSA/JACK/I2S configuration
│       └── config.py     YAML config loader
├── etc/                  Config file templates
├── scripts/              Build & utility scripts
├── tests/                Tests
├── docs/                 Documentation + test plans
└── hardware/             KiCad/PCB schematics
```

## Development

```bash
# Tests
source .venv/bin/activate
python -m pytest tests/ -v

# All 574 tests should pass
```

Early development — initial scaffold.