Improve documentatin navigation.

docs/AudioLatency.md

@@ -23,4 +23,4 @@ For the meantime, for best results, log off from your Raspberry Pi, and use the
 You may also want to watch out for temperature throttling of the CPUs. PiPedal displays the current CPU temperature in the bottom-right corner of the display. The system will reduce CPU speed in order prevent damage to the system if the CPU temperature goes above 70C (perhaps above 60C). The Pi 400 already has good heat sinks, so you shouldn't run into problems when running on a Pi 400. If you run into throttling problems on a Raspberry Pi 4, you may want to buy and install a heat sink (ridiculously cheap), or install a cooling fan. As a temporary work-around, you can orient the Raspberry Pi 4 board vertically, which can provide a real and meaningful reduction in CPU temperature.
 
 --------
-[<< System Requirements](ChoosingAUsbAudioAdapter.md) | [Command-Line Configuration of PiPedal >>](CommandLine.md)
+[<< System Requirements](ChoosingAUsbAudioAdapter.md)  | [Up](Documentation.md) | [Command-Line Configuration of PiPedal >>](CommandLine.md)

docs/BuildPrerequisites.md

@@ -42,5 +42,5 @@ Run the following command to install and configure React dependencies.
     ./react-config   # Configure React NPM dependencies.
    
 --------------------------   
-[<< Building PiPedal from Source](BuildingPiPedalFromSource.md) | [The Build System >>](TheBuildSystem.md)
+[<< Building PiPedal from Source](BuildingPiPedalFromSource.md) | [Up](Documentation.md) | [The Build System >>](TheBuildSystem.md)
  

docs/BuildingPiPedalFromSource.md

@@ -10,4 +10,4 @@ and cross-platform debugging, all of which should work with the PiPedal CMake bu
 more-or-less work, although you may have to scramble a bit to install some of the build dependencies.
 
 --------
-[<< Which LV2 Plugins Does PiPedal Support?](WhichLv2PluginsAreSupported.md) | [Build Prerequisites >>](BuildPrerequisites.md)
+[<< Which LV2 Plugins Does PiPedal Support?](WhichLv2PluginsAreSupported.md) | [Up](Documentation.md) | [Build Prerequisites >>](BuildPrerequisites.md)

docs/ChangingTheWebServerPort.md

@@ -13,4 +13,4 @@ To configure PiPedal to only accept connections on the Wi-Fi host access point:
      sudo pipedalconfig --install --port 172.22.1.1:80
 
 --------
-[<< Command-Line Configuration of PiPedal](CommandLine.md) | [Using LV2 Audio Plugins >>](UsingLv2Plugins.md)
+[<< Command-Line Configuration of PiPedal](CommandLine.md)  | [Up](Documentation.md) | [Using LV2 Audio Plugins >>](UsingLv2Plugins.md)

docs/ChoosingAUsbAudioAdapter.md

@@ -9,6 +9,6 @@ Pay close attention to the input VU meter of the first effect in your guitar eff
 Again, the MOTU M2 excels in this regard. It provides large, volume knobs for input and output, along with very readable VU meters which indicate both input and output signal levels. 
 
 --------
-[<< Configuring PiPedal After Installation](Configuring.md) | [Optimizing Audio Latency >>](AudioLatency.md)
+[<< Configuring PiPedal After Installation](Configuring.md)  | [Up](Documentation.md) | [Optimizing Audio Latency >>](AudioLatency.md)
 
 

docs/CommandLine.md

@@ -17,5 +17,5 @@ Things you can do with pipedalconfig:
 Run `pipedalconfig --help` for available options.
 
 --------
-[<< Optimizing Audio Latency](AudioLatency.md) | [Changing the Web Server Port >>](ChangingTheWebServerPort.md)
+[<< Optimizing Audio Latency](AudioLatency.md)  | [Up](Documentation.md) | [Changing the Web Server Port >>](ChangingTheWebServerPort.md)
      

docs/Configuring.md

@@ -63,4 +63,4 @@ If you are connecting to PiPedal with an Android device, via the Host Access Poi
 
 
 --------
-[<< Installing PiPedal](Installing.md) | [Choosing a USB Audio Adapter >>](ChoosingAUsbAudioAdapter.md)
+[<< Installing PiPedal](Installing.md)  | [Up](Documentation.md) | | [Choosing a USB Audio Adapter >>](ChoosingAUsbAudioAdapter.md)

docs/Debugging.md

@@ -122,4 +122,4 @@ Or you can avoid all of this, by configuring the debug instance to use a data fo
     }
 
 -----
-[<< The Build System](TheBuildSystem.md)
+[<< The Build System](TheBuildSystem.md) | [Up](Documentation.md)

docs/Installing.md

@@ -15,4 +15,4 @@ Install the package by running
 ```
 
 --------
-[<< System Requirements](SystemRequirements.md) | [Configuring PiPedal after Installation >>](Configuring.md)
+[<< System Requirements](SystemRequirements.md) | [Up](Documentation.md) | [Configuring PiPedal after Installation >>](Configuring.md)

docs/SystemRequirements.md

@@ -14,4 +14,4 @@ PiPedal has been tested on the following Operating Systems:
 If you are using Raspberry Pi OS, make sure to upgrade to the latest version, because versions of the Linux kernel later than 5.10 provide important bug fixes for USB audio devices.
 
 --------
-[Installing PiPedal >>](Installing.md)
+[Up](Documentation.md) | [Installing PiPedal >>](Installing.md)

docs/TheBuildSystem.md

@@ -23,4 +23,4 @@ If you are using a development environment other than Visual Studio Code, it sho
 to incorporate the PiPedal build procedure into your IDE workflow by using the contents of the build shell scripts as a model.
 
 -----
-[<< Build Prerequisites](BuildPrerequisites.md) | [How to Debug PiPedal >>](Debugging.md)
+[<< Build Prerequisites](BuildPrerequisites.md) | [Up](Documentation.md) | [How to Debug PiPedal >>](Debugging.md)

docs/UsingLv2Plugins.md

@@ -21,4 +21,4 @@ For a more complete (but still incomplete) list of LV2 audio plugins, see [here]
 
 
 --------
-[<< Changing the Web Server Port](ChangingTheWebServerPort.md) | [Which LV2 Plugins Does PiPedal Support? >>](WhichLv2PluginsAreSupported.md)
+[<< Changing the Web Server Port](ChangingTheWebServerPort.md)  | [Up](Documentation.md) | [Which LV2 Plugins Does PiPedal Support? >>](WhichLv2PluginsAreSupported.md)

docs/WhichLv2PluginsAreSupported.md

@@ -17,4 +17,4 @@ Although most LV2 plugins provide GUI interfaces, when running on a Linux deskto
 without using the provided desktop GUI interface. And all but a tiny minority of LV2 plugins (most of them analyzers, unfortunately) support this.
 
 --------
-[<< Using LV2 Audio Plugins](UsingLv2Plugins.md) | [BuildingPiPedal from Source >>](BuildingPiPedalFromSource.md)
+[<< Using LV2 Audio Plugins](UsingLv2Plugins.md)  | [Up](Documentation.md) | [BuildingPiPedal from Source >>](BuildingPiPedalFromSource.md)