PiPedal 1.2.33 initial commit

src/templates/30-pipedal-p2p-dnsmasq-nm.conf

@@ -0,0 +1,11 @@
+
+
+interface=p2p-${WLAN}-*
+    #disable dns, dhcp only.a"
+    port=0  
+    dhcp-range=172.23.0.20,172.23.0.127,15m
+    domain=local                        
+    address=/pipedal-p2p.local/172.23.0.2   
+    
+except-interface=eth0
+except-interface=${WLAN}

src/templates/50-pipedal-nm.conf

@@ -0,0 +1,2 @@
+[keyfile]
+unmanaged-devices=interface-name:${WLAN},interface-name:p2p-dev-${WLAN}

src/templates/dnsmasq-pipedal-nm.conf

@@ -0,0 +1,10 @@
+# PiPedal dnsmasq settings for p2p
+#disable dns, dhcp only."
+port=0  
+dhcp-range=172.23.0.3,172.23.0.127,15m
+domain=local                        
+address=/pipedal-p2p.local/172.23.0.2   
+
+# defensive. Not actually required.    
+except-interface=eth0
+except-interface=wlan0

src/templates/pipedal_nm_p2pd.service.template

@@ -0,0 +1,20 @@
+[Unit]
+Description=PiPedal P2P Session Manager
+After=network.target
+After=nss-lookup.target
+After=wpa_supplicant.service
+After=NetworkManager.service
+After=dhcpcd.service
+StartLimitIntervalSec=300
+StartLimitBurst=8
+
+[Service]
+ExecStart=${COMMAND} --systemd --loglevel info
+Type=notify
+WorkingDirectory=/var/pipedal
+Restart=on-failure
+TimeoutStopSec=5
+RestartSec=5s
+
+[Install]
+WantedBy=multi-user.target

src/templates/pipedal_p2pd.service.template

@@ -8,7 +8,7 @@ StartLimitIntervalSec=300
 StartLimitBurst=8
 
 [Service]
-ExecStart=${COMMAND} --systemd --log-level debug
+ExecStart=${COMMAND} --systemd --log-level info
 Type=notify
 WorkingDirectory=/var/pipedal
 TimeoutStopSec=5

src/templates/wpa_supplicant-pipedal.conf

@@ -0,0 +1,4 @@
+ctrl_interface=DIR=/run/wpa_supplicant GROUP=netdev
+update_config=1
+driver_param=p2p_device=6
+