From 36397e5d951b69de413bafc4710c9ee97f97c6a1 Mon Sep 17 00:00:00 2001 From: rerdavies Date: Fri, 27 Aug 2021 18:33:30 -0400 Subject: [PATCH] Update README.md for clean build. --- README.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index f287dad..c41ffb8 100644 --- a/README.md +++ b/README.md @@ -102,7 +102,7 @@ Run the following commands to install build tools required by the PiPedal build. Run the following commands to install dependent components required by the PiPedal build. sudo apt update - sudo apt install liblilv-dev libboost-dev libjack-jackd2-dev libnl-3-dev libnl-genl-3-dev libboost-all-dev + sudo apt install liblilv-dev libboost-dev libjack-jackd2-dev libnl-3-dev libnl-genl-3-dev libsystemd-dev catch The PiPedal build process also requires version 14 or later of `node.js`. Type `node --version` to see if you have a version of `node.js` installed already. Otherwise run the following commands as root to install the v14.x lts version of `node.js`: @@ -111,7 +111,7 @@ of `node.js` installed already. Otherwise run the following commands as root to apt-get install -y nodejs -### Building PiPedal +### Building PiPedal.ini PiPedal was developed using Visual Studio Code. If you open the PiPedal project as a folder in VS Code, Code will detect the CMake configuration files, and automatically configure itself. Once the VS Code CMake plugin has configured @@ -120,7 +120,7 @@ itself, build commands should appear on the bottom line of the Visual Studio Cod To install PiPedal, run a full non-debug build using Visual Studio Code, and then run the following command in the root project directory: - sudo ./init + sudo ,./init If you are using a different development environment, you can build the project by running the following command in the root project directory.